Silicon Bladers

 
Rotation
easy
 
Transport
easy
 
Performance
very good
 
Operation
excelent
 
Repair
very easy

An easy solution

An easy solution for installing T felt liners. Silicone bladders requiring low installation pressure of 0,4-0,6 bar only. Custom sizes available upon request.

 

Sanikom T-blader
Size (mm) Silicon length (mm) Lateral length (mm) Inflation (bar)
SB 70/50-45 850 350 1,0
SB 70/50-90 850 400 1,0
SB 70/70-45 850 350 1,0
SB 70/70-90 850 400 1,0
SB 100/50-45 850 350 1,0
SB 100/50-90 850 400 1,0
SB 100/70-45 850 350 1,0
SB 100/70-90 850 400 1,0
SB 100/100-45 850 350 1,0
SB 100/100-90 850 400 1,0
SB 125/70-45 850 350 1,0
SB 125/70-90 850 400 1,0
SB 125/100-45 850 350 1,0
SB 125/100-90 850 400 1,0
SB 125/125-90 850 400 1,0
SB 150/70-45 850 350 1,0
SB 150/70-90 850 400 1,0
SB 150/100-45 850 350 1,0
SB 150/100-90 850 400 1,0
SB 150/125-45 850 350 1,0
SB 150/125-90 850 400 1,0
SB 150/150-45 850 350 1,0
SB 150/150-90 850 400 1,0

Silicon blader holder

Silicone bladder holder made of Alu ends that are connected by spirals enabling high flexibility and enough toughness to get the bladder through the bends. Wit minor modification the supply of steam is possible.
T-blader Holder
Size (mm) Holder length (mm) Blader size (mm)
SB 30 800 50 and 70
SB 45 800 100
SB 64 800 125 and 150

Push&Turn!

Easy and effective system to push and turn the blader in the pipe, several length and sizes available also with the steam connection.

 

T-blader Push&Turn system
Size (mm) Push and Turn length (m)
DN 10 1,0 up to 3,0
DN 13 1,0 up to 5,0

Learn how to!